Milan : Mi0

 

Mio.PDF	Mio Photos 1	Mio Photos 2
Mio Photos 3	Mio Photos 4	Mio Photos 5

Self-powered two-way loudspeaker

The Milan Mi0 is a compact trapezoidal self-powered two-way loudspeaker enclosure consisting of a 10" reflex-loaded low frequency driver and a 1" high frequency compression driver on a 90°H x 60°V dispersion HF horn in an optimally tuned injection-moulded enclosure, together with an integrated two-channel amplifier module.

The integrated amplifier is a two channel unit - the Class D low frequency section delivering 180 watts while the Class AB high frequency section delivers 50 watts - which provides a balanced XLR microphone input and balanced line input on a jack/XLR connector with individual level controls, as well as overall bass and treble tone controls.

A balanced male XLR output provides a line level mix-out signal to additional powered Milan enclosures. Mains power is supplied via an IEC mains connector with integrated fuseholder. The trapezoidal cabinet is constructed from gas-injected polypropylene, self-coloured in blue/black, with a powder-coated perforated galvanised steel mesh grille, and the symmetrical 43° angled sides enable use as a wedge monitor. A dual-angle pole mount socket is fitted, and a recessed flush handle is provided on the top. Rigging points are provided on the top and bottom to enable vertical or horizontal suspension in permanent installations using M10 eyebolts.

 

Net Weight	11.89kg (26.2lbs)
Dimensions	521.5mm x 329.5mm x 294mm (20.5" x 13" x 11.6")
Components	1 x 10" (254mm) LF driver, 1 x 1" (25mm) HF compression driver
Frequency Response	55Hz - 22kHz ±3dB
Dispersion	90°H x 60°V @ -6dB points
Maximum SPL	119dB continuous, 125dB peak
Construction	Injection-moulded polypropylene enclosure. Self-coloured in blue/black. Recessed carrying handle. Integral dual angle pole mount socket
Grille	Powder coated perforated galvanised steel mesh
Connectors	Mic input: XLR female, wired pin 2 hot; Line input: Jack/XLR, wired pin 2 hot; Mix out: XLR male, wired pin 2 hot; IEC mains connector with integrated fuseholder
Flying Hardware	(6) M10 internal threaded rigging points
Spares & Accessories	LS-1029.2 10" (254mm) LF loudspeaker RC-1029 Recone kit CD-122 1" (25mm) HF compression driver RD-122 Replacement HF diaphragm PA-90 Speaker pole 90cm PB-55 Wall bracket, pole mount fixing EB-10 M10 shoulder eyebolt

배송정보

배송 방법 : 택배

배송 지역 : 전국지역

배송 비용 : 3,000원

배송 기간 : 2일 ~ 5일

배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.