Digitally self-powered loudspeaker
The NuQ-8DP is a compact self-powered two-way loudspeaker enclosure incorporating integral amplifiers and control electronics, designed for use in mobile speech and music sound reinforcement applications. The NuQ-8DP features a new generation of innovative Class D power amplifier module, utilising revolutionary 96kHz DSP technology.
It consists of a front loaded 8" neodymium low frequency driver and a proprietary 1" neodymium high frequency compression driver on a rotatable 100°H x 60°V Converging Elliptical Waveguide™ in a reflex-loaded enclosure. The waveguide can be rotated within the enclosure, making it possible to swap the horizontal and vertical coverage patterns.
The rear panel carries a fully integrated Class D amplifier and control electronics module, and incorporates high performance limiters set to optimise the continuous power and excursion thresholds. A Powercon connector provides mains input to the amplifier, which is auto-sensing over a range from 100 volts to 240 volts, and 3-pin XLRs are used for input and parallel link signal connections. RJ45 network connector enable multiple loudspeakers to be controlled and monitored over a BVNet network using TurboDrive™ software.
The cabinet is finished in black or optional white semi-matt textured paint, and includes rigging points for use with flying yokes and M10 shoulder eyebolts.
Net Weight | 12kg (26.4lbs) |
---|---|
Dimensions | 464mm x 272mm x 220mm (18.3" x 10.7" x 8.7") |
Components | 1 x 8" (203mm) LF driver, 1 x 1" (25mm) HF driver on a Converging Elliptical Waveguide™ |
Frequency Response | 60Hz - 20kHz ±4dB |
Dispersion | 100°H x 60°V@-6db points. Rotatable waveguide allows swap of horizontal and vertical pattern |
Maximum SPL | 118dB continuous, 124dB peak |
Construction | 12mm (1/2") birch plywood; rebated, screwed and glued. Finished in black semi-matt textured paint. One recessed carrying handle. Integral pole mount socket |
Grille | Powder coated perforated steel with acoustically transparent reticulated foam |
Connectors | Input: (1) XLR female, Link: (1) XLR male, pin 2 hot; Neutrik Powercon; (2) RJ45 network port |
Flying Hardware | M8 rigging points for NuQ-SB8 swivel brackets M10 rigging points for NuQ-FY8 flying yokes and EB-10 shoulder eyebolts |
Options | White textured paint |
Spares & Accessories | LS-8093 8" (203mm) LF loudspeaker RC-8093 Recone kit CD-115 1" (25mm) HF compression driver RD-115 Replacement diaphragm MG-NuQ8 Replacement grille NuQ-FY8 Flying yoke PB-55 Wall bracket, pole mount fixing |