검색검색

PT-EX12KE (해외배송 가능상품)

기본 정보
제조사 파나소닉
판매가 전화문의
상품코드 P0000DRK
수량 수량증가수량감소

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
PT-EX12KE 수량증가 수량감소 전화문의 (  0)
총 상품금액(수량) : 0 (0개)

 

ModelPT-EX16KPT-EX12K
Power supply200-240 V AC, 50/60 Hz100-240 V AC, 50/60 Hz
Power consumption1,850 W (18 W with standby mode)940 W (17 W with standby mode)
LCD panelPanel size46 mm (1.8 inches) diagonal (4:3 aspect ratio)
Display methodTransparent LCD panel (x 3, R/G/B)
Pixels786,432 (1,024 x 768) x 3, total of 2,359,296 pixels
Pixel configurationStripe
Pure color control device1
LensOptional
Lamp380 W x 4, lamp replacement cycle
(lamp power: Normal/Eco1, Eco2):
2,000 hours/3,000 hours*1
380 W x 2, lamp replacement cycle
(lamp power: Normal/Eco1, Eco2):
2,000 hours/3,000 hours*1
Screen size (diagonal)1.02–15.24 m (40–600 inches) (2.54–15.24 m [100–600 inches] with the ET-ELS03),
4:3 aspect ratio
Brightness*216,000 lm (4-lamps, lamp power: Auto/Normal, Optional lens: ET-ELS03)13,000 lm (2-lamps, lamp power: Auto/Normal, Optional lens: ET-ELS03)
Center-to-corner uniformity*290 %
Contrast*22,500:1
(full on/full off, 4-lamps, lamp power: Auto)
4,000:1
(full on/full off, 2-lamps, lamp power: Auto)
Resolution1,024 x 768 pixels
(Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.)
Scanning
frequency
HDMI/DVI-DHorizontal: 26–80 kHz, vertical: 23–85 Hz, dot clock: 162 MHz or lower
RGB (analog)fH: 15–120 kHz, fV: 48–120 Hz, dot clock: 230 MHz or lower
(Signals exceeding the dot clock rate of 165 MHz are downsampled.)
YPBPR (YCBCR)fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 28.13 kHz, fV: 50 Hz [1080/25sF]
fH: 27.00 kHz, fV: 48 Hz [1080/24sF]
fH: 33.75 kHz, fV: 60 Hz [1080/30sF]
fH: 56.25 kHz, fV: 50 Hz [1080/50p]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080/25p]
fH: 27.00 kHz, fV: 24 Hz [1080/24p]
fH: 33.75 kHz, fV: 30 Hz [1080/30p]
fH: 67.50 kHz, fV: 60 Hz [1080/60p]
Video/S-VideofH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shiftWith the ET-ELW06: vertical ±39% from center of screen (powered)*3
With the ET-ELW02/ELW04/ELS03/ELM01/ELT02/ELT03: vertical ±39%, horizontal ±10% from center of screen (powered)
With the ET-ELS02: vertical ±50%, horizontal ±10% from center of screen (powered)
With the ET-ELW03: the optical lens shift function cannot be used.
Keystone correction rangeVertical: Maximum ±40°, Horizontal: Maximum ±40°
(with XGA signal input, for vertical/horizontal correction only, Optional lens: ET-ELS03)
InstallationCeiling/floor, front/rear
TerminalsINPUT1DVI-D INDVI-D 24-pin x 1
(DVI 1.0 compliant, compatible with HDCP, compatible with single link only), 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1035/60i, 1080/24p, 1080/24sF, 1080/25p, 1080/25sF, 1080/30p, 1080/30sF, 1080/60p, 1080/50p, VGA (640 x 480)–WUXGA (1,920 x 1,200)*4,
compatible with non-interlaced signals only, dot clock: 25–162 MHz
HDMI INHDMI 19-pin x 1
(compatible with HDCP, compatible with Deep Color), 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1035/60i, 1080/24p, 1080/24sF, 1080/25p, 1080/25sF, 1080/30p, 1080/30sF, 1080/60p, 1080/50p, VGA (640 x 480)–WUXGA (1,920 x 1,200)*4,
compatible with non-interlaced signals only, dot clock: 25–162 MHz
ANALOG IND-sub HD 15-pin (female) x 1 (RGB x 1)
INPUT2RGB 5BNC IN/
VIDEO IN
BNC x 5 (RGB/YPBPR/YCBCR x 1), shared with VIDEO IN (BNC x 1) (composite video)
S-VIDEO INMini DIN 4-pin x 1 (S-Video)
INPUT3/INPUT4
Optional interface board slot, When the ET-MD16SD1 is installed,
 SERIAL IN (SDI IN 1/2): BNC x 2 (SD-SDI signal/single link HD-SDI signal)
  SD-SDI signal (YCBCR 4:2:2 10-BIT): 480i, 576i (SMPTE 259M-C compliant)
  

Single-link HD-SDI signal (YPBPR 4:2:2 10-BIT): 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/25sF, 1080/24p, 1080/24sF, 1080/30p, 1080/30sF (SMPTE 292M compliant)

 SERIAL OUT (SDI OUT): BNC x 1 (active through)
SERIAL IND-sub 9-pin (male) x 1
for external control
D-sub 9-pin (female) x 1
for external control
SERIAL OUTD-sub 9-pin (male) x 1 for link control
REMOTE INM3 Jack x 1 (for wired remote control)
LANRJ-45 x 1 (for network connection, 100Base-TX/10Base-T,
compliant with PJLink™ [class1])
USBUSB type-B (USB connector) x 1*5
Cabinet materialsMolded plastic
Dimensions (W x H x D)650 x 349 x 815 mm
(25.6” x 13.7” x 32.1”)
(with legs at shortest position, optional lens not included)
538.5 x 268 x 757 mm
(21.2” x 10.6” x 29.8”)
(with legs at shortest position, optional lens not included)
WeightApproximately 46.5 kg (102.5 lbs)
(optional lens not included)
Approximately 28 kg (61.7 lbs)
(optional lens not included)
Noise level51 dB (lamp power: Normal/Eco2),
48 dB (lamp power: Eco1)
42 dB (lamp power: Normal/Eco2),
39 dB (lamp power: Eco1)
Operating temperature5°C- 40°C [41°F-104°F] (less than 1,800 m [5,906 ft] above sea level),
5°C- 30°C [41°F-86°F] (between 1,800 m and 2,700 m [5,906 ft to 8,858 ft] above sea level)
0°C- 40°C [32°F-104°F] (less than 1,400 m [4,593 ft] above sea level),
0°C- 30°C [32°F-86°F] (between 1,400 m and 2,700 m [4,593 ft to 8,858 ft] above sea level)
Operating humidity20–80 % (no condensation)
Supplied accessoriesPower cord x 1 (x 2 for PT-EX16KE/EX12KE), power cord holder/power cord cover x 1set, wireless/wired remote control unit, batteries (AAA/R03/LR03 type x 2), VGA cable x 1,
software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software, Real Color Manager Pro.), lens attachment x 1set, lens lock lever fixing bracket x 1set, lightshielding plate x 3set, spacer x 1set, cable tie x 3
  • *1 The values given for the recommended lamp replacement cycles are maximum.
  • *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
  • *3 The ET-ELW06 is equipped with only vertical optical axis shift.
  • *4 Compliant with VESA CVT-RB.
  • *5 This port is for use by service personnel only. The USB interface may not operate with all USB compatible equipment.
Caution
Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.
NOTES ON USE
1 This product must not be used in residential areas.
2 This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.
3 The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping sound, or fail to illuminate, due to impact or extended use.
4 The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 1,000 mm (39-3/8 in) or more around the projector’s exhaust openings.
• If stacking projector units, care must be taken to provide the recommended space between units. These space requirements also apply to installation
  where only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the operating temperature listed in the
  specifications table during use. Also, make sure the projector’s intake and exhaust openings are not blocked. Ensure there is sufficient ventilation to
  prevent hot air from the exhaust openings being recirculated into the intake opening.
5 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
6 Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.
  • 배송정보
  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,000원
  • 배송 기간 : 2일 ~ 5일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
    고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
  • REVIEW

    구매하신 상품의 후기를 남겨주세요.

    게시물이 없습니다

    상품문의하기 모두 보기

    Q&A

    상품에 대해 궁금한 점을 문의해 주세요.

    게시물이 없습니다

    상품문의하기 모두 보기


    CS CENTER
    MON - FRI AM 09:00 - 18:00
    토/일/공휴일 전화문의
    LUNCH PM 12:00-01:00
    BANK INFO
    785-02-300427
    009902-04-147986