검색검색

ULXS4 ULXS 스탠다드 싱글채널 다이버시티 수신기 (해외배송 가능상품)

기본 정보
제조사 SHURE
판매가 구매문의
상품코드 P0000ETC
수량 수량증가수량감소

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
ULXS4 ULXS 스탠다드 싱글채널 다이버시티 수신기 수량증가 수량감소 구매문의 (  0)
총 상품금액(수량) : 0 (0개)

 

프로 음향 영상 설비|시공|서비스|Sound-Essay 사운드에세이

ⓕfacebook.com/soundessay

blog.naver.com/soundessay

※ 대리점 및 파트너 모집

Tel. 02-749-1663| 서울시 용산구 효창동 5-529 1층 


ULX® Standard UHF wireless (ULX-S)는 현역에서 활동하고 있는 아티스트나 전문 음향 설치 업자들에게 파격적인 성능과 가격을 제시합니다.
 
• 사용 주파수 대역
    - 주파수 허가 필요 대역 : 554-590MHz[J1], 662-698MHz[M1]
    - 주파수 허가 불필요 대역 : 925-937.5MHz[X7]
• 최대 동시 채널 수
    - 주파수 허가 필요 대역 : [J1]:21채널, [M1]:20채널
    - 주파수 허가 불필요 대역 : [X3]:12채널
• 송신기 RF 출력
    - 주파수 허가 필요 대역 : 30mW
    - 주파수 허가 불필요 대역 : 10mW
• 그룹/주파수 자동 스캔 설정
• 1440개의 선택 가능 주파수
• 5단계 오디오 미터
• RF 표시 LED
• 3단계 건전지 잔량 표시
• 다기능 그룹/채널 표시 LCD창
• 마이크/라인 스위치
• 탈착 가능한 1/4파장 안테나
• XLR 및 1/4”출력
• 견고한 플라스틱 섀시
• 1/2 랙 디자인

 


• Compatible Systems Per Band  Up to 20*
• Compatible Systems Using Multiple Bands  62*
• Selectable Frequencies  1440
• Auto-Setup  Scan / Channel Scan
• Detachable Antenna  Yes


제품스펙

• RF Carrier Frequency Range

470.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is used). Refer to the frequency supplement supplied with the system.

• Effective Range  100 m (300 ft.) under optimal conditions

    NOTE: Actual working range depends on RF signal absorption, reflection, and interference

• Audio Frequency Response  25 to 15,000 Hz, +/- 2 dB

    NOTE: Overall system frequency response depends on the microphone element.

• Transmitter Audio Polarity

Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output

• Transmitter Gain Adjustment Range

    - ULX1: 25 dB

    - ULX2: 25 dB

• Receiver Audio Output Level (+/- 38 kHz deviation, 1 kHz tone)

    - XLR connector (into 600 ohm load): +3.9 dBV (line), -17 dBV (mic)

    - 1/4 inch connector (into 3000 ohm load): -2 dBV

• Impedance  ULX1 (input): 1 Megohm ULXS4, ULXP4 (output): 50 ohms at line level; 2000 ohms at mic level

• Modulation  +/- 38 kHz deviation compressor-expander system with pre- and de-emphasis.

• RF Power Output  ULX1, ULX2: 30 mW maximum

• Dynamic Range  >100 dB, A-weighted

• RF Sensitivity  1.26 microVolt for 12 dB SINAD (typical)

• Image Rejection  80 dB typical

• Spurious Rejection  75 dB typical

• Ultimate Quieting (reference +/- 38 kHz deviation)  >105 dB, A-weighted

• System Distortion (reference +/- 38 kHz deviation, 1 kHz modulation)  0.3% total harmonic distortion, typical

• Power Requirements

    - ULX1, ULX2: 9V alkaline battery; 8.4 V Nicad optional

    - ULXS4, ULXP4: 14 - 18 Vdc (negative ground), 550 mA

• Battery Life  8 to 9 hours (with 9V alkaline battery)

• Operating Temperature Range  -20 degrees to 49 degrees C (-4 degrees to 120 degrees F)

    NOTE: Battery characteristics may limit this range.

• Overall Dimensions

    - ULX1: 96.5 mm H x 67 mm W x 26.7 mm D (3.86 x 2.68 x 1.10 in.)

    - ULX2/SM58: 228.6 L x 51 mm Dia. (9 x 2 in)

    - ULX2/BETA 58: 220.9 mm L x 51 mm Dia. (8.7 x 2 in.)

    - ULX2/SM86: 213 mm L x 49 mm Dia. (8.4 in x 1.9 in)

    - ULX2/87, ULX2/BETA 87: 223.5 mm L x 51 mm Dia. (8.8 x 2 in.)

    - ULX4S: 43 mm H x 214 mm W x 163 mm D (1.72 in. x 8.56 in. x 6.52 in.)

    - ULX4P: 43 mm H x 214 mm W x 172 mm D (1.72 in. x 8.56 in. x 6.88 in.)

• Net Weight

    - ULX1: 79 g (2.8 oz.) without battery

    - ULX2/58, ULX2/BETA 58: 289 g (10.2 oz.) without battery

    - ULX2/SM86: 251 g (8.8 oz.) without battery

    - ULX2/87, ULX2/BETA 87: 258 g (9.1 oz.) without battery

    - ULXS4: 1049 g (2 lbs, 5 oz.)

    - ULXP4: 1105 g (2 lbs, 7 oz.)

• ULXP4, ULXS4 Receiver Audio Output

Connector

Unbalanced (1/4 in.)

Balanced (XLR)

Actual Impedance

3 kilohm

Mic. Level: 1848 Ohms
Line Level: 75 Ohms

Pin Assignments

Tip = Hot
Ring/Sleeve = Ground

1 = Ground
2 = Hot
3 = Cold

Phantom Power Protection

Yes

Yes

• ULXP4, ULXS4 Receiver Antenna Input

Connector Type

BNC

Actual Impedance

50 Ohms

Nominal Input Level

-95 to -30 dBm

Maximum Input Level

+6 dBm (-20 dBm recommended)

Pin Assignments

Shell = Ground, Center = Signal

Voltage for Remote Power

12 Vdc, 150 mA maximum


  • 배송정보
  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,000원
  • 배송 기간 : 2일 ~ 5일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
    고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
  • REVIEW

    구매하신 상품의 후기를 남겨주세요.

    게시물이 없습니다

    상품문의하기 모두 보기

    Q&A

    상품에 대해 궁금한 점을 문의해 주세요.

    게시물이 없습니다

    상품문의하기 모두 보기


    CS CENTER
    MON - FRI AM 09:00 - 18:00
    토/일/공휴일 전화문의
    LUNCH PM 12:00-01:00
    BANK INFO
    785-02-300427
    009902-04-147986