| Directional characteristics: |
Supercardioid |
| Principle of operation: |
Pressure gradient |
| Cartridge type: |
Pre-polarized condenser |
| Frequency range: |
20 Hz to 20 kHz |
| Frequency range, ± 2 dB, 20 cm (7.9 in) distance: |
80 Hz to 15 kHz with 3 dB diffuse field boost at 8 to 15 kHz |
| Sensitivity, nominal ± 3 dB at 1 kHz: |
20 mV/Pa; -34 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted: |
Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A)) |
| Equivalent noise level, ITU-R BS.468-4: |
Typ. 35 dB (max. 38 dB) |
| S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): |
71 dB(A) |
| Total harmonic distortion (THD): |
<1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine |
| Dynamic range: |
Typ. 100 dB |
| Max. SPL, peak before clipping: |
134 dB |
| Output impedance: |
From Microdot: 30 to 40 ohm; from DAD6001: 100 ohm |
| Cable drive capability: |
Up to 300 m (984 ft) with DAD6001 XLR adapter |
| Output balance principle: |
Signal balanced with DAD6001 XLR adapter |
| Common mode rejection ratio (CMRR): |
> 60 dB from 50 Hz to 15 kHz with DAD6001 XLR adapter |
| Power supply (for full performance): |
For wireless systems: Min. 5 V ? max. 50 V through DPA adapter; with DAD6001: 48 V phantom power ±4 V |
| Current consumption: |
1.5 mA. 3.5 mA with DAD6001 XLR adapter |
| Connector: |
MicroDot; 3 pin XLR-M from DAD6001 XLR adapter |
| Color: |
Black (4098HB) or white (4098HW) |
| Microphone weight: |
5 g (0.18 oz) |
| Microphone diameter: |
10 mm (0.39 in) |
| Capsule diameter: |
5.4 mm (0.2 in) |
| Microphone length: |
154 mm (6.1 in) |
| Polarity: |
Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter) |
| Temperature range: |
-40 °C to 45 °C (-40 °F to 113 °F) |
| Relative humidity: |
Up to 90 % |
| Gooseneck length: |
95 mm (3.7 in) |
수량을 선택해주세요.
0)
