dbx2231/DBX/31밴드/듀얼/이퀼라이져 (해외배송 가능상품)
| 제조사 | dbx |
|---|---|
| 판매가 | 구매문의 |
| 상품코드 | P00000SP |
| 수량 |   |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
수량을 선택해주세요.
위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.
| 상품명 | 상품수 | 가격 |
|---|---|---|
| dbx2231/DBX/31밴드/듀얼/이퀼라이져 |
|
구매문의 ( 0)
|
| 총 상품금액(수량) : 0 (0개) | ||
제품소개
2231 Type III 노이즈 감쇄를 가진 2개의 표준 랙 공간을 채우는(3U 사이즈) 2 채널, 31 밴드, 1/3옥타브 이퀄라이저 입니다.
LIMMITER 기능내장,
기능 스위치: EQ BYPASS / LOW CUT / RANGE SEL.(6 OR 15) / TYPEⅢNR / THRESHOLD
특징
* Revolutionary patent-pending instant encode/decode Type III Noise Reduction increases S/N
ratio by up to 20dB.
* PeakPlus Limiter (also patent pending) threshold range from 0dBu to +20dBu
* Four segment LED bargraph for BOTH Gain Reduction AND Output Level.
* Status LEDs offer visual feedback for all settings on the front panel.
* PeakPlus Limiter (also patent pending) threshold range from 0dBu to +20dBu
* Four segment LED bargraph for BOTH Gain Reduction AND Output Level.
* Status LEDs offer visual feedback for all settings on the front panel.
스펙
INPUTS
Connectors: 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced 40kS, unbalanced 20kS
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz
OUTPUTS
Connectors: 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
Type: Impedance-balanced/unbalanced, RF filtered
Impedance: Balanced 200S, unbalanced 100S
Max Output Level: >+21dBu balanced/unbalanced into 2kS or greater
>+20dBm balanced/unbalanced (into 600)
SYSTEM PERFORMANCE
Bandwidth: 20Hz to 20kHz, +/-0.5dB
Frequency Response: <10Hz to >50kHz, +0.5/-3dB
Noise Reduction In (+/-6 and +/-12dB range):
Signal-to-Noise: >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
Dynamic Range: >120dB, unweighted
Noise Reduction Out: (+/-6dB range):
Signal-to-Noise: >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
Dynamic Range: >112dB, unweighted
Noise Reduction Out: (+/-12dB range):
Signal-to-Noise: >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
Dynamic Range: >108dB, unweighted
THD+Noise: <0.04%, 0.02% typical at +4dBu, 1kHz
Interchannel Crosstalk: <-80dB, 20Hz to 20kHz (2215/2231)
Noise Reduction: Up to 20dB of dynamic broadband noise reduction
FUNCTION SWITCHES
Type III NR: Activates dbx Type III' Noise Reduction
EQ Bypass: Bypasses the graphic equalizer section in the signal path
Low Cut (recessed): Activates the 40Hz 18dB/octave Bessel high-pass filter
Range (recessed): Selects either +/- 6dB or +/- 15dB slider boost/cut range
INDICATORS
Output Level Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
Gain Reduction Meter: 4-LED bar graph (all Red) at 0, 3, 6, and 10dB
Type III NR Active: Yellow LED
EQ Bypass: Red LED
Clip: Red LED
Low Cut Active: Red LED
+/-6dB range: Red LED
+/-12dB range: Red LED
POWER SUPPLY
Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60Hz
Power Consumption: 23W
Mains Connection: IEC receptacle
Connectors: 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced 40kS, unbalanced 20kS
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz
OUTPUTS
Connectors: 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
Type: Impedance-balanced/unbalanced, RF filtered
Impedance: Balanced 200S, unbalanced 100S
Max Output Level: >+21dBu balanced/unbalanced into 2kS or greater
>+20dBm balanced/unbalanced (into 600)
SYSTEM PERFORMANCE
Bandwidth: 20Hz to 20kHz, +/-0.5dB
Frequency Response: <10Hz to >50kHz, +0.5/-3dB
Noise Reduction In (+/-6 and +/-12dB range):
Signal-to-Noise: >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
Dynamic Range: >120dB, unweighted
Noise Reduction Out: (+/-6dB range):
Signal-to-Noise: >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
Dynamic Range: >112dB, unweighted
Noise Reduction Out: (+/-12dB range):
Signal-to-Noise: >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
Dynamic Range: >108dB, unweighted
THD+Noise: <0.04%, 0.02% typical at +4dBu, 1kHz
Interchannel Crosstalk: <-80dB, 20Hz to 20kHz (2215/2231)
Noise Reduction: Up to 20dB of dynamic broadband noise reduction
FUNCTION SWITCHES
Type III NR: Activates dbx Type III' Noise Reduction
EQ Bypass: Bypasses the graphic equalizer section in the signal path
Low Cut (recessed): Activates the 40Hz 18dB/octave Bessel high-pass filter
Range (recessed): Selects either +/- 6dB or +/- 15dB slider boost/cut range
INDICATORS
Output Level Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
Gain Reduction Meter: 4-LED bar graph (all Red) at 0, 3, 6, and 10dB
Type III NR Active: Yellow LED
EQ Bypass: Red LED
Clip: Red LED
Low Cut Active: Red LED
+/-6dB range: Red LED
+/-12dB range: Red LED
POWER SUPPLY
Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60Hz
Power Consumption: 23W
Mains Connection: IEC receptacle
2231 | |
|
Inputs |
1/4" TRS, female XLR (pin 2 hot), and barrier Balanced 40k ohm, unbalanced 20k ohm >+21 dBu balanced or unbalanced |
|
Outputs |
1/4" TRS, male XLR (pin 2 hot), and barrier Balanced 40k ohm, unbalanced 20k ohm > +21 dBu balanced or unbalanced |
|
Frequency Response |
20 Hz to 20 kHz, ±0.5 dB |
|
Dynamic Range |
>120 dB, unweighted |
|
Thd+Noise |
<0.004%, 0.02% typical at +4 dBu, 1 kHz |
|
Dimensions |
8.9(H) × 48.3(W) × 20.1(D) cm |
|
Weight |
3.9 kg |
고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
