DriveRack 260 (해외배송 가능상품)
| 제조사 | dbx |
|---|---|
| 판매가 | 구매문의 |
| 상품코드 | P00000TG |
| 수량 |   |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
수량을 선택해주세요.
위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.
| 상품명 | 상품수 | 가격 |
|---|---|---|
| DriveRack 260 |
|
구매문의 ( 0)
|
| 총 상품금액(수량) : 0 (0개) | ||
특징
Dbx DriveRack 260 투어 사운드 전문가들과 식별력이 뛰어난 오디오 계약자(contractor)들이 하이엔드(high-end) 투어와 설치에 dbx DriveRack 제품을 선택하는 데에는 이유가 있습니다.
DriveRack 제품은 시스템 사운드가 최상이 되도록 보증하는 툴들을 제공합니다. 새로운 260 모델의 출시로 인해 경쟁상대가 없는 시스템/loudspeaker 컨트롤은 계속됩니다.
260은 테스트에 계속 투자를 하였고 계약자들은 DriveRack 라인의 다른 제품들의 특성을 인정하였습니다. 260은 독립적인 출력 프로세싱과 라이브 사운드 어플리케이션에 대한 풀 타임(full time) RTA와 더불어 풀 밴드패스(full band pass)와 크로스오버 설정을 제공합니다. 계약자들은 wall-panel 로직 컨트롤의 컨트롤입력과 특허출원중인 Advanced Feedback Suppression(AFS)을 높이 평가하고 있습니다.
DriveRack 260은 계속 DriveRack 시리즈의 전통을 이어가고 있는데 이것은 30년이상 신호 프로세싱의 표준을 재정의한 본 회사에 의해 탄생되어진 것입니다. DriveRack 260은 최고수준의 신호 프로세싱과 더불어 간단하고 직관적인 유저 인터페이스를 제공하려는 목적과 비전을 가지고 설계되어졌습니다.
이 목표는 linkable 28-Band Graphic Equalizer에 의한 두개의 독립적인 채널의 프로세싱 능력, 업계표준의 dbx stereo compressor 모듈, feedback eliminator 와 입력상의 parametric EQ를 포함하는 6 채널 출력시스템의 120A Subharmonic 신디사이저, PeakStopPlus® 리미터(스피커의 파열을 방지하기 위해) 그리고 alignment 딜레이를 제공함으로써 달성되었습니다.
이 특징들은 위저드 셋업 시스템과 완전한 DriveWare GUI 컨트롤과 결합되어 최적화되고 완벽하게 확장이 용이한 시스템의 모든 프로세싱을 제공하도록 보증하는 체계화된 디자인을 나타냅니다.
Description
**Updater note: While new DriveRack 260s from the factory have version 1.02 firmware, there is no practical difference between 1.01 and 1.02. Version 1.02 only has additional code to increase productivity on the production floor. There is no benefit to the end user.
There is a reason that Tour Sound Professionals and discriminating Audio Contractors choose dbx® DriveRack® products for their high-end tours and installs. The DriveRack products provide the tools that ensure that the system sounds its very best. With the introduction of the new 260, the heritage of unrivaled system/loudspeaker control continues.
The 260 capitalizes on the road tested and contractor approved nature of the other products in the DriveRack line. The 260 provides full bandpass and crossover configurations as well as independent output processing and a full time RTA for live sound applications. Contractors will appreciate its control inputs for wall-panel logic control and the patent-pending Advanced Feedback Suppression (AFS™).
The DriveRack 260 continues the legacy of DriveRack series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. The DriveRack 260 was designed with the purpose and vision of providing state-of-the-art signal processing, while utilizing a simple and intuitive user interface. This goal has been achieved by offering two independent channels of processing power with a linkable 28-Band Graphic Equalizer, industry-standard dbx stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, PeakStopPlus® limiters (to provide protection against speaker blowouts) and alignment delay. These features combined with the Wizard setup system and complete DriveWare™ GUI control represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system.
Features
• Feedback Elimination
• 2.7 Seconds of Alignment and Zone Delay
• RS-232 PC GUI control
• Classic dbx Compression and Limiting
• Graphic and Parametric EQ
• Auto-EQ Function
• Full Bandpass, Crossover, and Routing Configurations
• Auto Gain Control
• Pink Noise Generator and fulltime RTA
• Setup Wizard with JBL speaker and Crown Power Amplifier Tunings
• Security Lockout
• Wall Panel Control Inputs
There is a reason that Tour Sound Professionals and discriminating Audio Contractors choose dbx® DriveRack® products for their high-end tours and installs. The DriveRack products provide the tools that ensure that the system sounds its very best. With the introduction of the new 260, the heritage of unrivaled system/loudspeaker control continues.
The 260 capitalizes on the road tested and contractor approved nature of the other products in the DriveRack line. The 260 provides full bandpass and crossover configurations as well as independent output processing and a full time RTA for live sound applications. Contractors will appreciate its control inputs for wall-panel logic control and the patent-pending Advanced Feedback Suppression (AFS™).
The DriveRack 260 continues the legacy of DriveRack series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. The DriveRack 260 was designed with the purpose and vision of providing state-of-the-art signal processing, while utilizing a simple and intuitive user interface. This goal has been achieved by offering two independent channels of processing power with a linkable 28-Band Graphic Equalizer, industry-standard dbx stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, PeakStopPlus® limiters (to provide protection against speaker blowouts) and alignment delay. These features combined with the Wizard setup system and complete DriveWare™ GUI control represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system.
Features
• Feedback Elimination
• 2.7 Seconds of Alignment and Zone Delay
• RS-232 PC GUI control
• Classic dbx Compression and Limiting
• Graphic and Parametric EQ
• Auto-EQ Function
• Full Bandpass, Crossover, and Routing Configurations
• Auto Gain Control
• Pink Noise Generator and fulltime RTA
• Setup Wizard with JBL speaker and Crown Power Amplifier Tunings
• Security Lockout
• Wall Panel Control Inputs
Specifications
고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
