|
SPECIFICATIONS
|
RMX 4050HD
|
RMX 4050HD / CE Compliant
|
|
|
STEREO MODE (Both Channels Driven)
|
|
8 ohms
FTC 20 Hz - 20
kHz, 0.1% THD
EIA 1 kHz, 0.1%
THD
|
800 W
850 w
|
650 W
|
|
4 ohms
FTC 20 Hz - 20
kHz, 0.1% THD
EIA 1 kHz, 0.1%
THD
|
1300 W
1400 w
|
1300 W
|
|
2 ohms
FTC 20 Hz-20 kHz
0.1% THD
EIA 1 kHz 1% THD
|
1600 W
2000 w
|
1600 W
2000W
|
|
|
BRIDGE MONO MODE
|
|
8 ohms
FTC 20 Hz-20 kHz
0.1% THD
EIA 1 kHz 0.1%
THD
|
2600 W
2800 w
|
2600 W
2800 w
|
|
4 ohms
EIA 1 kHz 1% THD
|
4000 W
|
4000W
|
|
Distortion
(SMPTE-IM)
|
Less than 0.02%
|
|
Distortion (Typical)
20 Hz-20 kHz: 10
dB below rated
power
1 kHz and below:
full rated power
|
Less than 0.02% @ 4 ohms, less than 0.01% @ 8 ohms
Less than 0.02% @ 4 ohms, less than 0.01% @ 8 ohms
|
|
Frequency Response
|
20 Hz to 20 kHz, 8 ohms, LF filter bypassed, +0/-1 dB
5 Hz to 50 kHz, 8 ohms, LF filter bypassed, +0/-3 dB
|
|
Damping Factor
|
Greater than 250 @ 8 ohms
|
|
Noise (unweighted)
|
100 dB below rated output (20 Hz - 20 kHz, 8 ohm load)
|
|
Input Impedance
|
20k ohm balanced, 10k ohm unbalanced
|
|
Input Sensitivity
|
1.25 Vrms for
800 W into 8
ohms
|
1.12 Vrms for 650 W into 8 ohms
|
|
Voltage Gain
|
64x (36 dB) for 8 ohm load
|
|
Controls Front:
Controls Rear:
|
AC power switch, Ch. 1 and Ch. 2 gain control
10-pole DIP switch featuring LF filter on/off, LF filter 30/50
Hz, Clip Limiter on/off controls for each channel and
switches for selecting Stereo, Parallel, or Bridge mode.
Push-button circuit breaker for each channel.
|
|
Indicators
|
Power-On: Green LED, Protect: Red LED
Signal -30dB: Yellow LED, Clip: Red LED
|
|
Connectors Input:
Connectors Output:
|
XLR female, TRS (1/4-inch), and barrier-strip screw
terminals, each channel
Binding posts and Speakon® outputs (Ch. 1 Speakon wired
for biamp)
|
|
Cooling
|
Continuously variable-speed fan, rear-to-front air flow
|
|
Amplifier Protection
|
Short circuit, open circuit, thermal, ultrasonic, and RF
protection. Stable into reactive or mismatched loads
|
|
Load Protection
|
On/off muting, DC fault output crowbar
|
|
Power Requirements
|
100, 120 or 240 Volts AC
(+/-10%) 50-60 Hz (factory
configured)
|
240 Volts AC (+/-10%) 50-60
Hz
|
|
Dimensions
|
19" 19.0" (48.3 cm) wide, 5.25" (13.3 cm) tall, 15.9" (40.39
cm) overall depth
|
|
Weight
|
68 lb (30.84 kg) net, 77 lb (34.43 kg) shipping
|
수량을 선택해주세요.
0)
